Heat Magic
Heat Magic
Heat Soluble Topping/Stabilizer
Use Heat Magic to keep embroidery stitches elevated and uniform on the surface of high pile and textured fabrics. Because Heat Magic is removed with the touch of an iron, it is ideal when embellishing or embroidering luxury fabrics such as velvet, silk, and linen. Heat Magic is essential when stitching on household basics such as towels, fleece and more in order to keep your embroidery dense and the background fabric from peeking out through the stitching.
-
Clear and Easy to see through
-
Easy to remove from around embroidery and machine stitching
-
Embossed backside prevents curling and shifting
-
Perfect for fabrics that can't be wet such as velvet, wool, satin, etc.
-
Trace intricate quilt patterns onto Heat Magic for an easy guide when free motion quilting or thread painting.
-
Prevents loops from coming through the embroidery on high pile fabrics such as towels and terry cloth.
Place Heat Magic in the Hoop with your fabric.
Stitch the embroidery design directly through the Heat Magic.
Tear away as much of the Heat Magic as possible when the embroidery is complete.
Touch the surface of the embroidery with a hot iron.
Beautiful embroidery results!
To use as a topping:
-
Place a piece of Heat Magic on the surface of the hooped item, bumpy side touching the fabric, and secure the outer corners with tape to prevent movement.
-
Complete the embroidery design.
-
Tear away as much of the Heat Magic as possible from around the design.
-
Place your heated iron directly on top of the embroidery to remove the excess stabilizer. Be sure your iron temp is at least 300°F (148°C).
To use as a stabilizer:
-
Place a piece Heat Magic within the hoop with the item to be embroidered. Use a piece at least one inch larger than the outer perimeter of the hoop and place the bumpy side of the stabilizer against the fabric.
-
Embroider the design.
-
Tear away as much of the Heat Magic from around the design as possible.
-
Place your heated iron directly on top of the embroidery to remove the excess stabilizer. Be sure your iron temp is at least 300°F (148°C).
*To clean your iron of any residue, heat the iron up to its highest temperature and move the irons surface back and forth over a wet towel firmly. Iron cleaners such as Dritz and Niagra work as well.
Sizes Available:
10" x 10 yds, 20" x 10 yds
